Home Offbeat How To Clean Your Smoke Detector

How To Clean Your Smoke Detector

by Dr Prem Community Writer
Clean Your Smoke Detector

Do you know when your smoke detector is due for a check-up? If not, it’s time to learn how. Not only will this save you from any potential house fire that could have occurred if the detectors weren’t working properly, but it will also help ensure that they are functioning correctly and give accurate readings of any smoke in the home. In order to make sure your smoke detectors are still in good shape after all these years, here is a guide on how to clean them!

1. Disconnect power supply

When it comes time to clean your home’s smoke detectors, make sure that you disconnect the battery first. This will avoid any electrical shorts or sparks during work hours! Once disconnected from power sources at both ends of wire connections (if possible), remove all dust-collecting cabinet and custodial covers before beginning disassembly so they don’t end up in an uncovered pile on top of one another when reassembled later – which would mean having two dirty jobs instead of just one . Be cautious when handling components with exposed contacts because oils found inside these devices could cause corrosion if touched directly.

2. Use a damp cloth or cotton swab dipped in rubbing alcohol

Smoke Detector cleaning

The second step in cleaning a smoke detector is to use a damp cloth or cotton swab dipped in rubbing alcohol. Rubbing alcohol removes oils and residue from the surface of your home’s detectors while still allowing them to breathe, so you can get rid of any old odors that have been lingering for too long!

3. Spray the top of the detector with an anti-static spray like WD-40

Now it’s time to spray the top of your smoke detector with anti-static WD-40. This will help keep any static electricity from charging up and attracting particles, which could cause false alarms!

4. Wipe off all dirt and grime with a dry cloth

smoke detector

Cleaning your smoke detector will keep it from going off when there’s no actual fire. To do this, wipe the detector free of any dirt or grime with a clean dry cloth.

5. Reconnect power supply

In order to be sure your smoke detector is working properly after cleaning, you must reconnect the power supply and make sure it lights up.

The last step of the process in making an area safe again from fires starts with connecting one wire back into another on either side where they were connected before starting work- this will ensure there aren’t any short circuits or broken connections which could cause damage if not fixed immediately!

Conclusion

Conclusion paragraph: It’s important to take care of your smoke detectors, carbon monoxide alarms, and other safety devices installed in your home. Regular maintenance can ensure they are working properly when you need them the most! If you’re not sure how or where to start this process, contact us today at Control Fire Protection for fire protection services. We will get everything up-to-date so that you have peace of mind knowing all is well with your family’s safety at home.

Article Submitted By Community Writer

Today's Top Articles: